Dell PowerStore 3000X EMC PowerStore Network Configuration Guide for PowerSwit - Page 58
PowerStore X model: Cabling the appliance to the switches
![]() |
View all Dell PowerStore 3000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
8 PowerStore X model: Cabling the appliance to the switches This chapter contains the following information. Topics: • Cable the base enclosure to the ToR switches • Cable the ToR switches together • Cable the Top-of-Rack switches to the core uplinks Cable the base enclosure to the ToR switches Cable the nodes to the Top of Rack (ToR) switches. 2 1 4 3 Figure 18. Base enclosure connection to the ToR switches As demonstrated in the diagram, when cabling the nodes to the ToR switches: ● Port 0 and Port 1 on the same node must connect to opposite switches ● Port 0 on Node A, and Port 0 on Node B must connect to opposite switches ● Port 1 on Node A, and Port 1 on Node B must connect to opposite switches Table 19. Steps to cable to the switches 1 Connect Port 0 of the bottom node (A) to Port 1 of the bottom switch (1). 2 Connect Port 1 of the bottom node (A) to Port 1 of the top switch (2). 3 Connect Port 1 of the top node (B), to Port 54 of the bottom switch (1). 4 Connect Port 0 of the top node (B), to Port 54 of the top switch (2). 58 PowerStore X model: Cabling the appliance to the switches
![](/manual_guide/products/dell-powerstore-1000t-emc-powerstore-network-configuration-guide-powerswitch-series-4a2d536/58.png)