Dell PowerStore 3000X EMC PowerStore Network Configuration Guide for PowerSwit - Page 27
Con Virtual Link Trunking interface
View all Dell PowerStore 3000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Steps 1. Establish a terminal connection to the switch to the first ToR switch (Switch1). 2. Enter global configuration mode. configure terminal 3. Create the Internal network. interface vlan 1 description Internal_Network no shutdown exit 4. Create the Storage VLAN. interface vlan 200 description Storage_Network no shutdown exit 5. Create the NAS VLAN. interface vlan 300 description NAS_Network no shutdown exit 6. Repeat steps on the second ToR switch (Switch2). Code sample for configuring VLANs configure terminal interface vlan 1 description Internal_Network no shutdown exit interface vlan 200 description Storage_Network no shutdown exit interface vlan 300 description NAS_Network no shutdown exit Configure Virtual Link Trunking interface Perform the following steps if you have chosen to implement VLTi for your Layer 2 connectivity between the two Top of the Rack (ToR) PowerSwitch Series. Prerequisites Work with a network administrator to implement VLTi. VLTi should not be configured without a networking specialist. You can cable the switches together prior to configuring connectivity between the switches or you can cable the switches after configuring the type of connectivity. Refer to Cable the Top-of-Rack (ToR) Switches together for details. VLTi is required to configure Link Aggregation Control Protocol between the PowerStore nodes. Steps 1. Establish a terminal session to the first ToR switch (Switch1). PowerStore T model: Configure the switches 27