Dell PowerStore 3000X EMC PowerStore Network Configuration Guide for PowerSwit - Page 24
Con general settings on the Top-of-Rack (ToR) switches
View all Dell PowerStore 3000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
ip address 100.0.100.50/24 exit management route 0.0.0.0/0 100.0.100.1 exit ntp server 100.0.100.200 exit interface ethernet 1/1/2 description "PowerStoreNodeA_MgmtPort" no shutdown switchport mode access switchport access vlan 100 exit interface ethernet 1/1/53 description "PowerStoreNodeB_MgmtPort" no shutdown switchport mode access switchport access vlan 100 exit interface port-channel 10 description Uplink no shutdown switchport mode trunk switchport access vlan 1 switchport trunk allowed vlan 100 exit interface ethernet 1/1/25 description Uplink no shutdown channel-group 10 mode active no switchport flowcontrol receive off flowcontrol transmit off exit interface ethernet 1/1/26 description Uplink no shutdown channel-group 10 mode active no switchport flowcontrol receive off flowcontrol transmit off exit exit Configure general settings on the Top-of-Rack (ToR) switches Perform the following steps to configure general settings on the two ToR switches. Prerequisites In OS10EE, LLDP (Link Layer Discovery Protocol) is enabled globally on each interface by default. You can use LLDP for troubleshooting and validation. It is recommended that you enable all of the optional TLVs (type, length, value) in the LLDPU (Link Layer Discovery Protocol Data Units) on the switches. About this task 24 PowerStore T model: Configure the switches