Dell PowerStore 3000X EMC PowerStore Network Configuration Guide for PowerSwit - Page 19
Step details, Notes, port channel 10, Initial Configuration Wizard
View all Dell PowerStore 3000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Table 5. PowerStore T model Network Setup Preparation Worksheet (example) (continued) Step Step details Notes 16. As a best practice it is recommended to add a spanning tree protocol to the ToR switches. Record the spanning tree protocols to set on each switch. Spanning tree protocol for ToR switch 1 40960 Spanning tree protocol for ToR switch 2 45056 17 Record the port channel ID for the OOB management switch. port channel 10 18. Once you have completed steps above, you have the necessary information to configure the switches. Continue to work with your network administrator to complete the Initial Configuration Worksheet now to ensure that: ● Your network configuration on the switch aligns with the network configuration that will be done in PowerStore T model. ● You reserve the necessary network resources to complete deployment of PowerStore T model and the PowerStore T model networks. 19. Determine if you will use a direct connection or a remote connection to discover your PowerStore. Once you have successfully discovered your PowerStore, you will be guided through the Initial Configuration Wizard to create your first PowerStore cluster. PowerStore T model: Before you begin 19