Dell PowerStore 3000X EMC PowerStore Network Configuration Guide for PowerSwit - Page 49
PowerStore X model: Con switches, About this task, Steps
View all Dell PowerStore 3000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
7. Enter global configuration mode. configure terminal 8. It is recommended that you change the password after logging into the switch for the first time. Use the following command to change the switch password. username admin password role sysadmin Validate the Top-of-Rack (ToR) switch versions and licensing Before you configure the switch and networks, check that the switch operating system version and licensing. About this task If you are required to upgrade your switch OS, or reinstall the switch license see the OS10 Enterprise Edition User Guide for details. Steps 1. Establish a terminal connection to the switch and hit the Enter key after you have connected. 2. Run the command show version to display the OS version. Dell EMC recommends upgrading to the latest release available on Dell Digital Locker (www.dell.com/support/software/). OS10# show version Dell EMC Networking OS10-Enterprise Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved. OS Version: 10.4.1.2 Build Version: 10.4.1.2.524 Build Time: 2018-09-26T17:20:01-0700 System Type: S4148F-ON Architecture: x86_64 Up Time: 2 weeks 04:34:35 3. Verify that the license was installed on the switches. Run the command show license status to display the license installation. The License Type: field should indicate PERPETUAL. If an evaluation license is installed, licenses purchased from Dell EMC are available for download on Dell Digital Locker (www.dell.com/support/software/). OS10# show license status System Information Vendor Name : Dell EMC Product Name : S4148F-ON Hardware Version: A00 Platform Name : x86_64-dellemc_s4100_c2538-r0 PPID : CN00Y2VTCES0082O0038 Service Tag : D8MSG02 License Details Software : OS10-Enterprise Version : 10.4.1.1 License Type : PERPETUAL License Duration: Unlimited License Status : Active License location: /mnt/license/D8MSG02.lic NOTE: If OS10EE was factory installed, a perpetual license is already installed on the switch. PowerStore X model: Configure switches 49