Dell Precision 610 Dell Precision WorkStation 610 Mini Tower Systems Service M - Page 46

Table 3-2 lists (in alphabetical order) system error messages that can appear on the monitor screen. These messages can help you find the source of a problem. Some error messages indicate fatal errors. When a fatal error occurs, the system usually cannot be rebooted until an appropriate hardware change has been made. The following messages indicate that a fatal error has occurred. Their definitions and probable causes are listed in Table 3-2. Alert! Primary processor is out of rev. System halted Alert! Secondary processor is out of rev. System halted Bad error-correction code (ECC) on disk read Controller has failed Data error ECC memory error Gate A20 failure Hard disk controller failure Hard disk drive read failure Hard disk failure Keyboard clock line failure Keyboard controller failure Keyboard data line failure Keyboard stuck key failure No timer tick interrupt Shutdown failure Timer chip counter 2 failed 3-4 Dell Precision 610 Mini Tower Systems Service Manual