Dell Precision 610 Dell Precision WorkStation 610 Mini Tower Systems Service M - Page 51
Incorrect NIC drivers
View all Dell Precision 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Memory address line failure at address, read value expecting value During memory test, value read at address was incorrect. Faulty or improperly seated DIMMs or defective system board. Memory data line failure at address, read value expecting value Memory double word logic failure at address, read value expecting value Memory odd/even logic failure at address, read value expecting value Memory write/read failure at address, read value expecting value Memory allocation error Memory tests terminated by keystroke Network card is not present in the system No boot device available Software in use conflicts with operating system, application program, or utility. Memory test did not complete. System does not detect NIC. System does not recognize diskette drive or hard-disk drive from which it is trying to boot. Faulty application program or utility. POST memory test terminated by user pressing . Incorrect NIC drivers installed. Faulty diskette, diskette/ tape drive subsystem, hard-disk drive, hard-disk drive subsystem, or no boot disk in drive A. Beep Codes and Error Messages 3-9