Dell Precision 610 Dell Precision WorkStation 610 Mini Tower Systems Service M - Page 50
System Setup program
View all Dell Precision 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Drive not ready ECC memory error Gate A20 failure General failure Hard disk controller failure Hard disk drive read failure Hard disk failure Invalid configuration information please run SETUP program Keyboard clock line failure Keyboard failure Keyboard data line failure Diskette is missing from or is improperly inserted in diskette drive. Uncorrectable multibit ECC memory error is detected. Gate A20 of the keyboard controller malfunctioned. Operating system cannot execute command. Hard-disk drive failed to initialize. Missing, defective, unformatted, or improperly inserted diskette. Faulty or improperly seated DIMMs or defective system board. Faulty keyboard controller (defective system board). Corrupted or improperly installed operating system. Incorrect configuration settings in System Setup program, improperly connected hard-disk drive cable, faulty hard-disk controller subsystem (defective system board), or loose power cable. System Setup program contains incorrect system configuration settings. Incorrect configuration settings in System Setup program or faulty battery. System cannot communicate with keyboard. Keyboard cable connector loose or improperly connected, defective keyboard, or defective keyboard/mouse controller (defective system board). Keyboard stuck key failure Keyboard controller failure Keyboard/mouse controller failed. Defective keyboard/ mouse controller (defective system board). 3-8 Dell Precision 610 Mini Tower Systems Service Manual