Dell Precision 610 Dell Precision WorkStation 610 Mini Tower Systems Service M - Page 48
Alert! System
View all Dell Precision 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Alert! Primary processor is out of rev. Alert! Processor thermal probe failure detected. Alert! Secondary processor is out of rev. Alert! Singlebit memory error previously detected in XXXXh. Alert! System fan was not detected. Alert! Unbuffered and registered SDRAM DIMMs cannot be mixed. Alert! Uncorrectable memory error previously detected in XXXXh. Auxiliary Device failure. Verify that mouse and keyboard are securely attached to connectors. System detected that the primary processor is not the correct revision. If the system contains more than 512 MB of RAM, this message will be followed by a System Halted message. Processor is a type not supported by Dell. Processor or system board has failed. Faulty processor or defective system board. System detected that the secondary processor is not the correct revision. If the system contains more than 512 MB of RAM, this message will be followed by a System Halted message. Single-bit ECC error was detected during the previous operating session. Processor is a type not supported by Dell. Faulty or improperly seated DIMMs or defective system board. System fan was not detected. No fan installed, defective fan, or fan cable not connected. Mixing of unbuffered and registered SDRAM DIMMs is not supported. Two different types (unbuffered and registered) of SDRAM DIMMs have been installed together and may not be compatible. Multibit ECC error was Faulty or improperly detected during the pre- seated DIMMs or defecvious operating session. tive system board. System detected a mouse failure. Faulty mouse, or faulty mouse controller or keyboard is attached to the mouse connector. 3-6 Dell Precision 610 Mini Tower Systems Service Manual