Dell Precision 610 Dell Precision WorkStation 610 Mini Tower Systems Service M - Page 55

Wide flat-blade screwdriver

Get Dell Precision 610 PDF manuals and user guides View all Dell Precision 610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

This chapter provides procedures for removing the components, assemblies, and subassemblies in the Dell Precision 610 mini tower systems. Unless otherwise noted, each procedure assumes the following: You have performed the steps in "Precautionary Measures" found later in this chapter. You have removed the computer cover. You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided. Most of the procedures in this chapter require the use of one or more of the following tools: Small flat-blade screwdriver Wide flat-blade screwdriver #1 and #2 Phillips-head screwdrivers 1/4-inch nutdriver Tweezers or long-nose pliers Also, use a wrist grounding strap as explained in the next section, "Precautionary Measures." Removing and Replacing Parts 4-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Removing and Replacing Parts
4-1
&+$37(5²¶
5HPRYLQJ±DQG±5HSODFLQJ±3DUWV
T
his chapter provides procedures for removing the components, assemblies,
and subassemblies in the Dell Precision 610 mini tower systems.
Unless otherwise noted, each procedure assumes the following:
¹
You have performed the steps in “Precautionary Measures” found later in
this chapter.
¹
You have removed the computer cover.
¹
You can replace or reinstall a part by performing the removal procedure in
reverse order unless additional information is provided.
5HFRPPHQGHG±7RROV
Most of the procedures in this chapter require the use of one or more of the
following tools:
¹
Small flat-blade screwdriver
¹
Wide flat-blade screwdriver
¹
#1 and #2 Phillips-head screwdrivers
¹
1/4
-inch nutdriver
¹
Tweezers or long-nose pliers
Also, use a wrist grounding strap as explained in the next section, “Precaution-
ary Measures.”