Dell Vostro 1700 Owner's Manual - Page 168
Replacing the DIMM B Memory Module
View all Dell Vostro 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
1 2 1 securing clips (2) 2 memory module Replacing the DIMM B Memory Module NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). 1 Align the notch in the module edge connector with the tab in the connector slot. 2 Slide the memory module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it. NOTE: If the memory module is not installed properly, the computer may not boot. No error message indicates this failure. 168 Adding and Replacing Parts
168
Adding and Replacing Parts
Replacing the DIMM B Memory Module
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
1
Align the notch in the module edge connector with the tab in the
connector slot.
2
Slide the memory module firmly into the slot at a 45-degree angle, and
rotate the module down until it clicks into place. If you do not feel the
click, remove the module and reinstall it.
NOTE:
If the memory module is not installed properly, the computer may not boot.
No error message indicates this failure.
1
securing clips (2)
2
memory module
1
2