Dell Vostro 5390 Service Manual - Page 21
Removing the M.2 2230 solid-state drive
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
1 Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive slot on the system board. 2 Replace the screw (M2x2.5) that secures the solid-state drive to the system board. 1 Install the battery. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. Removing the M.2 2230 solid-state drive 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Remove the battery. The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure. Removing and installing components 21
1
Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive
slot on the system board.
2
Replace the screw (M2x2.5) that secures the solid-state drive to the system board.
1
Install the
battery
.
2
Install the
base cover
.
3
Follow the procedure in
After working inside your computer
.
Removing the M.2 2230 solid-state drive
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
base cover
.
3
Remove the
battery
.
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
Removing and installing components
21