Dell Vostro 5390 Service Manual - Page 31
WWAN card, Removing the WWAN card
![]() |
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
1 Connect the antenna cables to the WLAN card. 2 Align the notch on the WLAN card with the tab on the WLAN card slot and insert the WLAN card at an angle into the WLAN card slot. 3 Align and place the WLAN card bracket on the WLAN card. 4 Replace the screw (M2x2.5) to secure the WLAN card bracket to the WLAN card. 1 Install the battery. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. WWAN card Removing the WWAN card NOTE: This procedure is only applicable for computers shipped with a WWAN configuration. 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Remove the battery. The following image indicates the location of WWAN card and provides a visual representation of the removal procedure. Removing and installing components 31
![](/manual_guide/products/dell-vostro-5390-service-manual-8d125c8/31.png)