Dell Vostro 5390 Service Manual - Page 56
end of the plastic scribe or handle of the screwdriver, press and roll over the pressure
![]() |
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
1 Peel off the transparent protective films from the SR tapes. 2 Align and adhere both the SR tapes to the plastic edge of the display back-cover. 3 Peel off the blue protective films from the SR tapes. 4 Starting from the top, align and place the display panel on the display back-cover. 5 Remove the release paper from the pressure film. 6 Adhere the pressure film on the display panel. 7 Using the flat end of the plastic scribe or handle of the screwdriver, press and roll over the pressure films until they turn pink. 8 Peel off the pressure film from the display panel. 9 Place the display bezel on the display back-cover and snap it into place. 1 Install the display bezel. 56 Removing and installing components
![](/manual_guide/products/dell-vostro-5390-service-manual-8d125c8/56.png)
1
Peel
off
the transparent protective
films
from the SR tapes.
2
Align and adhere both the SR tapes to the plastic edge of the display back-cover.
3
Peel
off
the blue protective
films
from the SR tapes.
4
Starting from the top, align and place the display panel on the display back-cover.
5
Remove the release paper from the pressure
film.
6
Adhere the pressure
film
on the display panel.
7
Using the
flat
end of the plastic scribe or handle of the screwdriver, press and roll over the pressure
films
until they turn pink.
8
Peel
off
the pressure
film
from the display panel.
9
Place the display bezel on the display back-cover and snap it into place.
1
Install the
display bezel
.
56
Removing and installing components