Dell Vostro 5390 Service Manual - Page 37
Display assembly, Removing the display assembly
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
1 Connect the power-adapter port cable to the system board. 2 Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly. 3 Align and place the display-cable bracket on the system board. 4 Replace the screw (M2.5x3.5) that secure the display-cable bracket to the system board. 5 Using the alignment posts, close the display hinges. 6 Replace the screw (M2x4) that secure the right display hinge to the system board. 1 Install the battery. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. Display assembly Removing the display assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Remove the battery. The following image indicates the location of display assembly and provides a visual representation of the removal procedure. Removing and installing components 37