Dell Vostro 5390 Service Manual - Page 41
I/O board
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
1 Align and place the palm-rest and keyboard assembly on the display assembly. 2 Using the alignment posts, close the display hinges. 3 Replace the two screws (M2.5x3.5) that secures the left display hinge to the I/O board and palm-rest and keyboard assembly. 4 Replace the screw (M2x4) that secures the right display hinge to the system board. 5 Connect the display cable on to the connector on the system board 6 Align and place the display-cable bracket on the display cable. 7 Replace the screw (M2x4) that secures the display-cable bracket to the system board. 1 Install the battery. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. I/O board Removing and installing components 41
1
Align and place the palm-rest and keyboard assembly on the display assembly.
2
Using the alignment posts, close the display hinges.
3
Replace the two screws (M2.5x3.5) that secures the left display hinge to the I/O board and palm-rest and keyboard assembly.
4
Replace the screw (M2x4) that secures the right display hinge to the system board.
5
Connect the display cable on to the connector on the system board
6
Align and place the display-cable bracket on the display cable.
7
Replace the screw (M2x4) that secures the display-cable bracket to the system board.
1
Install the
battery
.
2
Install the
base cover
.
3
Follow the procedure in
After working inside your computer
.
I/O board
Removing and installing components
41