Dell Vostro 5390 Service Manual - Page 43
Installing the I/O board
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installing the I/O board If you are replacing a component, remove the existing component before performing the installation procedure. The following image indicates the location of I/O board and provides a visual representation of the installation procedure. 1 Align and place the I/O board on the palm-rest and keyboard assembly. 2 Replace the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly. 3 Connect the I/O-board cable to the I/O board and close the latch to secure the cable. 4 Adhere the tape that secures the I/O board to the I/O board. 5 Using the alignment posts, close the display hinges. 6 Replace the two screws (M2.5x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly. 1 Install the fan. 2 Install the battery. Removing and installing components 43