Dell Vostro 5390 Service Manual - Page 27
Speakers, Removing the speakers
![]() |
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
1 Connect the fan cable to the system board. 2 Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly. 3 Replace the two (M2x3) screws that secure the fan to the palm-rest and keyboard assembly. 4 Connect the I/O-board cable to the system board and I/O board. NOTE: This step is only applicable for computers shipped with a WWAN configuration. 1 Install the battery. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. Speakers Removing the speakers 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. Removing and installing components 27
![](/manual_guide/products/dell-vostro-5390-service-manual-8d125c8/27.png)
1
Connect the fan cable to the system board.
2
Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly.
3
Replace the two (M2x3) screws that secure the fan to the palm-rest and keyboard assembly.
4
Connect the I/O-board cable to the system board and I/O board.
NOTE:
This step is only applicable for computers shipped with a WWAN
configuration.
1
Install the
battery
.
2
Install the
base cover
.
3
Follow the procedure in
After working inside your computer
.
Speakers
Removing the speakers
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
base cover
.
Removing and installing components
27