Dell Vostro 5390 Service Manual - Page 39
Open the display hinges at an angle of 90 degrees., Remove the palm-rest and keyboard assembly
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
1 Remove the screw (M2.5x3.5) that secures the display-cable bracket to the system board. 2 Lift the display-cable bracket off the system board. 3 Using the pull tab, disconnect the display cable from the system board. 4 Remove the two screws (M2.5x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly. 5 Remove the screw (M2x4) that secures the right display hinge to the system board. 6 Open the display hinges at an angle of 90 degrees. 7 Remove the palm-rest and keyboard assembly off the display assembly. Removing and installing components 39
1
Remove the screw (M2.5x3.5) that secures the display-cable bracket to the system board.
2
Lift the display-cable bracket
off
the system board.
3
Using the pull tab, disconnect the display cable from the system board.
4
Remove the two screws (M2.5x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly.
5
Remove the screw (M2x4) that secures the right display hinge to the system board.
6
Open the display hinges at an angle of 90 degrees.
7
Remove the palm-rest and keyboard assembly
off
the display assembly.
Removing and installing components
39