Dell Vostro 5390 Service Manual - Page 60

Display back-cover, Removing the display back-cover

Page 60 highlights

1 Adhere the camera to the display cable (tape) and connect the camera cable to the camera and turn it over. 2 Using the alignment post, turn the camera over and adhere to the display back-cover. 3 Adhere the tape that secures the camera to the display back-cover. 1 Install the display panel. 2 Install the display bezel. 3 Install the display assembly. 4 Install the WLAN card. 5 Install the battery. 6 Install the base cover. 7 Follow the procedure in After working inside your computer. Display back-cover Removing the display back-cover NOTE: This procedure is not applicable to computers shipped with a WWAN configuration. 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Remove the battery. 4 Remove the WLAN card. 5 Remove the display assembly. 6 Remove the display bezel. 7 Remove the display hinges. 8 Remove thedisplay panel. 9 Remove the display cable. 10 Remove the camera. 60 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

1
Adhere the camera to the display cable (tape) and connect the camera cable to the camera and turn it over.
2
Using the alignment post, turn the camera over and adhere to the display back-cover.
3
Adhere the tape that secures the camera to the display back-cover.
1
Install the
display panel
.
2
Install the
display bezel
.
3
Install the
display assembly
.
4
Install the
WLAN card
.
5
Install the
battery
.
6
Install the
base cover
.
7
Follow the procedure in
After working inside your computer
.
Display back-cover
Removing the display back-cover
NOTE:
This procedure is not applicable to computers shipped with a WWAN
configuration.
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
base cover
.
3
Remove the
battery
.
4
Remove the
WLAN card
.
5
Remove the
display assembly
.
6
Remove the
display bezel
.
7
Remove the
display hinges
.
8
Remove the
display panel
.
9
Remove the
display cable
.
10
Remove the
camera
.
60
Removing and installing components