Dell Vostro 5390 Service Manual - Page 42
Lift the I/O board, the palm-rest and keyboard assembly.
![]() |
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Removing the I/O board 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Remove the battery. 4 Remove the fan. The following image indicates the location of I/O board and provides a visual representation of the removal procedure. 1 Remove the two screws (M2.5x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly. 2 Open the display hinges at an angle of 90 degrees. 3 Peel the tape that secures the I/O-board cable to the I/O board. 4 Open the latch and disconnect the I/O-board cable from the I/O board. 5 Remove the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly. 6 Lift the I/O board off the palm-rest and keyboard assembly. 42 Removing and installing components
![](/manual_guide/products/dell-vostro-5390-service-manual-8d125c8/42.png)