Dell Vostro 5390 Service Manual - Page 54
Using a plastic scribe, slide out the pull tab of the SR tape from both sides of the display panel.
![]() |
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
1 Using a plastic scribe, slide out the pull tab of the SR tape from both sides of the display panel. 2 Pull out a small section of the SR tape. 3 Roll the SR tape around the plastic scribe. NOTE: To avoid severing/breaking the SR tape, pull out only a small section of the SR tape and then roll the SR tape around the scribe. 4 Lift the display panel off the display back-cover. 5 Peel the tape that secures the display cable to the display back-cover. 6 Open the latch and disconnect the display cable from the display back-cover. 54 Removing and installing components
![](/manual_guide/products/dell-vostro-5390-service-manual-8d125c8/54.png)
1
Using a plastic scribe, slide out the pull tab of the SR tape from both sides of the display panel.
2
Pull out a small section of the SR tape.
3
Roll the SR tape around the plastic scribe.
NOTE:
To avoid severing/breaking the SR tape, pull out only a small section of the SR tape and then roll the SR tape
around the scribe.
4
Lift the display panel
off
the display back-cover.
5
Peel the tape that secures the display cable to the display back-cover.
6
Open the latch and disconnect the display cable from the display back-cover.
54
Removing and installing components