Dell Vostro 5390 Service Manual - Page 36
Installing the power-adapter port
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2 Remove the base cover. 3 Remove the battery. The following image indicates the location of power-adapter port and provides a visual representation of the removal procedure. 1 Remove the screw (M2.5x3.5) that secures the display-cable bracket to the system board. 2 Remove the screw (M2x4) that secures the right display hinge to the system board. 3 Open the display hinges at an angle of 90 degrees. 4 Disconnect the power-adapter port cable from the system board. 5 Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly. 6 Lift the power-adapter port, along with its cable, off the palm-rest and keyboard assembly. Installing the power-adapter port If you are replacing a component, remove the existing component before performing the installation procedure. The following image indicates the location of power-adapter port and provides a visual representation of the installation procedure. 36 Removing and installing components