Dell Vostro 5390 Service Manual - Page 23
Heat sink, Removing the heat sink
![]() |
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
1 Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive slot on the system board. 2 Slide the solid-state bracket on to the solid-state drive on the system board. 3 Replace the screw (M2x2.5) that secures the solid-state drive to the system board. 1 Install the battery. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. Heat sink Removing the heat sink 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Remove the battery. The following image indicates the location of the heat sink and provides a visual representation of the removal procedure. Removing and installing components 23
![](/manual_guide/products/dell-vostro-5390-service-manual-8d125c8/23.png)