Dell XPS M1730 M1730 XPS M1730 Owners Manual - Page 154
Replacing a Hard Drive in the Hard Drive Cage
View all Dell XPS M1730 M1730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Replacing a Hard Drive in the Hard Drive Cage 1 Remove two screws on each side of the hard drive cage to free the hard drive, then lift the drive out of its tray in the cage. NOTICE: When a hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting Against Electrostatic Discharge" in the Product Information Guide. 1 2 1 screws 2 hard drive cage 2 Remove the new hard drive from its packaging. Save the original packaging for storing or shipping the hard drive. 3 Place the new hard drive into the drive cage tray and secure it with two screws on each side. a Install the hard drive so that the manufacturer's label faces the bottom of the drive cage and the SATA connectors are at the open end of the cage. b Install the primary hard drive in the tray labeled 0. You can install a secondary hard drive in the tray labeled 1. 154 Adding and Replacing Parts