Epson 7880 Network Guide - Page 12

4. If the necessary components are not in the list, click Install to install them. 5. For LPR or Internet printing: Double-click Internet Protocol Version 4 (TCP/IPv4) on the Local Area Connection Properties dialog box to open the Internet Protocols Version 4 (TCP/IPv4) Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK. 6. Restart the computer. The necessary components are now installed. Go to the section "Connecting the Network Interface to the Network" on page 14. Windows XP For Windows XP, use the following procedure to install the necessary components. Note: ❏ The Windows XP CD-ROM may be required during the installation. ❏ When using TCP/IP or IPP for printing, you need to set the IP address, the subnet mask, and the default gateway of the computer. 1. Click Start, highlight Control Panel, and then click Network and Internet Connections. Select Network Connections. 2. Under LAN or High-Speed Internet, click the Local Area Connection icon. 3. Under Network Tasks, click Change settings of this connection. 4. Check if the following necessary components are in the list. 12 Setting Up Your System for Network Printing