Epson ActionPrinter 3000 User Manual - Page 17
Assembling the Printer, Installing the platen knob, Installing the ribbon cartridge, the platen knob
View all Epson ActionPrinter 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Assembling the Printer After choosing a good place for your printer, you install the platen knob. Installing the platen knob You use the platen knob to manually feed paper in the printer when the printer is turned off. You find the platen knob packed in an indentation in the white foam packing material. 1. Insert the knob into the hole on the printer's side and rotate it until it slips onto the shaft. 2. Push firmly on the knob until it fits against the printer case. Installing the ribbon cartridge Before installing the ribbon cartridge, make sure that the printer is not plugged into an electrical outlet. 1-6 Setting Up the Printer
Assembling the Printer
After choosing a good place for your printer, you install the platen
knob.
Installing
the platen knob
You use the platen knob to manually feed paper in the printer when
the printer is turned off. You find the platen knob packed in an
indentation in the white foam packing material.
1.
Insert the knob into the hole on the printer’s side and rotate it
until it slips onto the shaft.
2.
Push firmly on the knob until it fits against the printer case.
Installing the ribbon cartridge
Before installing the ribbon cartridge, make sure that the printer is
not plugged into an electrical outlet.
1-6
Setting Up the Printer