Epson ActionPrinter 3000 User Manual - Page 43

Setting the top of form position

Get Epson ActionPrinter 3000 - ActionPrinter-3000 Impact Printer PDF manuals and user guides View all Epson ActionPrinter 3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Using Continuous Paper Setting the top of form position You may need to set the top of the form to a certain position for printing on ready-made forms. To set the top-of-form position at the third line of the paper, for example, mark the paper 4.1 inches (105 mm) above the perforation. Then load the paper and align this mark with the mark on the tractor unit, as shown below. The third line (0.42 inches or 10.6 mm) below the perforation becomes the top-of-form position. You may have to experiment with setting the top of form position several times to get this adjustment just right. Paper Handling 2-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
Using
Continuous
Paper
Setting the top of form position
You may need to set the top of the form to a certain position for
printing
on
ready-made forms.
To set the top-of-form position at the third line of the paper, for
example, mark the paper
4.1
inches
(105 mm)
above the
perforation. Then load the paper and align this mark with the mark
on the tractor unit, as shown below. The third line (0.42 inches or
10.6
mm) below the perforation becomes the top-of-form position.
You may have to experiment with setting the top of form position
several times to get this adjustment just right.
Paper Handling
2-11