Epson DFX-8000 User Manual - Page 115
Note: Whenever DIP switch, is off
View all Epson DFX-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Using the Paper Memory Feature Saving information for overlappb multi-part forms-with labels To save paper format and thickness information for multi-part forms 'that overlap slightly and have 'labels on them, follow the steps below. 1. Load the overlapping multi-part forms with labels onto the front tractor. (See the section on lqqdingpaper onto the front tractor in Chapter 2.) 2. Turn off the printer. 3. Use DIP switch 3-4 to select the memory area where you want the printer to store the paper format and thickness information. Memory area 1 is selected when DIP switch 3-4 is off. (This is the printer's default setting.) To select memory area 2, turn on the switch. 4. Use DIP switch 3-2 to set the page length. The page length is 11 inches when DIP switch 3-2 is off and 12 inches when the switch is on. If you plan to use forms of a different page length, use software commands to set the page length after you finish saving the form's information. 5. Turn on DIP switches 3-5 and 3-6. This tells the printer you want to save information for multi-part forms that overlap slightly and have labels on them. Note: Whenever DIP switch 3-5 is on, the skip over perforation feature is valid, regardless of DIP switch 3-3's setting. 6. Follow steps 6 through 14 on pages 3-25 through 3-29. 3-30 Using the Printer