Epson DFX-8000 User Manual - Page 28
Testing the Printer, Plugging in the Printer, Make sure that the printer is turned off. - self test
View all Epson DFX-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Testing the Printer Now that your printer is fully assembled, you can use its built-in self test function to be sure the printer is working correctly before you connect it to a computer. You should perform this test to make sure that your printer was not damaged during shipping and that the ribbon is correctly installed. Before performing the self test, you need to plug in your printer and load paper. Plugging in the printer 1. Make sure that the printer is turned off. 2. Check the label on the printer's back panel to make sure the voltage required by the printer matches that of your electrical outlet. Setting Up the Printer 1-13
Testing the Printer
Now that your printer is fully assembled, you can use its built-in
self test function to be sure the printer is working correctly before
you connect it to a computer. You should perform this test to make
sure that your printer was not damaged during shipping and that
the ribbon is correctly installed.
Before performing the self test, you need to plug in your printer and
load paper.
Plugging in the printer
1.
Make sure that the printer is turned off.
2.
Check the label on the printer’s back
panel
to make sure the
voltage
required by the printer matches that of your electrical
outlet.
Setting Up the Printer
1-13