Epson DFX-8000 User Manual - Page 190
MICRO FEED, TEAR OFF, Printer Options
View all Epson DFX-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Paper Cutter 3. If you loaded new paper onto the current tractor since the host time you cut off a document, you may need to adjust the cutting position. Open the paper separator cover and use the MICRO FEED buttons to adjust the cutting position with the cutting line. Then close the paper separator cover. Note: You,can set the cutting position, from 0.1 inches (3.0 mm) to 1.0 inches (25.4 mm) below the perforation at the end of the last printed page. The factory setting of the cutting position is the 0.1 inches (3.0 mm) position below the perforation; 4. Press the TEAR OFF button. The printer cuts off your printed document and feeds the fresh paper back to the top of form position. 5-24 Using the Printer Options
Paper
Cutter
3.
If you loaded new paper onto the current tractor
since
the
host
time you cut off a document, you may need to adjust the
cutting position. Open the paper separator cover and use the
MICRO FEED
buttons to adjust the cutting position with the
cutting line. Then close the paper separator cover.
Note:
You,can
set the cutting position, from
0.1
inches
(3.0
mm)
to
1.0
inches
(25.4
mm) below the perforation at the end of the
last printed page. The factory setting of the cutting position is the
0.1
inches
(3.0
mm) position below the perforation;
4.
Press the
TEAR OFF
button. The printer cuts off your printed
document and feeds the fresh paper back to the top of form
position.
5-24
Using
the
Printer Options