Epson DFX-8000 User Manual - Page 228
of text., paper., The printing position is, incorrect continued., using, Troubleshooting
View all Epson DFX-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
Printing Problem Solution The printing position is incorrect (continued). In BASIC, enter one of the following statements: WIDTH LPRINT 255 LDTH "LPTl:", 255 If the printer still does not print properly, set the right margin to the maximum setting using ESC Q. All the text is printed on the same line. A line feed signal is not being sent at the end of each line. Turn on DIP switch 2-4 so that the printer adds a line feed code to each carriage return sent by the application program. See page 3-15. The printer inserts extra blank lines between lines of text. Extra line feed signals are being sent. Turn off DIP switch 2-4. See page 3-15. The page length does not match the length of the paper. The page length may be set incorrectly. Check your application program's page length setting and change it if necessary. You can also turn off DIP switch 3-2 to set the page length to 11 inches (279.4 mm) or turn on the switch to set the page length to 12 inches (304.8 mm). See page 3-17. If your application program can send control codes to the printer, you can set the page size using ESC C or ESC C 0. 7-10 Troubleshooting