Epson DFX-8000 User Manual - Page 271
Data Control, Select Paper Path
View all Epson DFX-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 271 highlights
Epson ESUP Commands Arranged by Topic ESC EM Format: Select Paper Path ASCII code: Decimal: Hexadecimal: ESC EM n 27 25 n 1B 19 n Comments: The following values can be used for n: F : Selects the front tractor. B : Selects the rear tractor. Use this command only when the paper cutter is installed. BEL Format: ASCII code: BEL Decimal: 7 H e x a d e c i m a l : 07 Comments: Sounds the printer's beeper. Beeper Data control CR Format: Carriage Return ASCII code: CR Decimal: 13 H e x a d e c i m a l : OD Comments: Prints the data in the buffer and returns the print position to the left margin. A line feed may be added if DIP switch 2-4 is on or the AUTO FEED XT line on the parallel interface is held LOW. 9-12 Command Summary
Epson
ESUP
Commands Arranged by Topic
ESC
EM
Format:
Select Paper Path
ASCII code:
ESC
EM
n
Decimal:
27
25
n
Hexadecimal:
1B
19
n
Comments:
The following values can be used for
n:
F
:
Selects the front tractor.
B
:
Selects the rear tractor.
Use this command only when the paper cutter is installed.
BEL
Format:
ASCII code:
BEL
Decimal:
7
Hexadecimal:
07
Comments:
Sounds the printer’s beeper.
Beeper
Data control
CR
Format:
Carriage
Return
ASCII code:
CR
Decimal:
13
Hexadecimal:
OD
Comments:
Prints the data in the buffer and returns the print position to the
left margin. A line feed may be added if DIP switch
2-4
is on or
the AUTO FEED XT line on the parallel interface is held LOW.
9-12
Command Summary