Epson DFX-8000 User Manual - Page 221

Power Supply Problem Power is not being supplied to the printer. Solution The POWER light does not go on. The power cable may not be fully plugged into the printer or the electrical outlet. Turn off the printer and see that the cable is fully plugged into the printer and the electrical outlet. The power switch is off. Turn on the switch. The electrical outlet may not be supplying power. Check if an outside switch or automatic timer controls the electrical outlet. If so, use a different outlet. The electrical outlet may not work. Plug another electrical device into the outlet to check whether the outlet works. The POWER light comes on briefly and then goes 0%. The Zight stays ofi after you turn the printer off and then on again. The voltage supplied by the electrical outlet may not be correct for your printer. Check the label on the printer's rear panel to see if the printer's voltage rating matches that of your electrical outlet. If the voltages do not match, unplug the printer and contact your Epson dealer. Do not reconnect the power cable to an electrical outlet. See page 1-13. Troubleshooting 7-3