Epson DFX-8000 User Manual - Page 194
Removing the Paper Cutter, store it in its original box and packing
View all Epson DFX-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Paper Cutter Note: You can use the ESC EM printer command to change tractors only when the paper cutter is installed. For more information about this command, see the Command Summary in Chapter 9. CAUTION: When you load paper on the tractor, be sure that the first page is tom off exactly at the perforation, and the first four holes in the paper fit over the sprocket unit pins. Removing the paper cutter To remove the paper cutter, follow the steps below. After you remove the paper cutter, store it in its original box and packing materials. 1. Cut off any printed document in the printer as described in the section above on cutting off a printed document. 2. Turn off the printer. 5-28 Using the Printer Options
Paper
Cutter
Note: You can use the
ESC
EM printer command to change tractors
only when the paper cutter is installed. For more information
about this command, see the Command Summary in Chapter
9.
CAUTION:
When you load paper on the tractor, be sure that
the first page is tom off exactly at the perforation, and the
first four holes in the paper fit over the sprocket unit pins.
Removing the paper cutter
To remove the paper cutter, follow the steps below. After you
remove the paper cutter, store it in its original box and packing
materials.
1.
Cut off any printed document in the printer as described in the
section above on cutting off a printed document.
2.
Turn off the printer.
5-28
Using
the
Printer
Options