Epson DFX-8000 User Manual - Page 126
TEAR OFF, You can, MICRO, TEAR OFF light is, inch, or hold
View all Epson DFX-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Using Short Tear-Off 3. Press the TEAR OFF button to enter tear-off mode. The TEAR OFF light goes on and the printer feeds the paper's perforation to the printer's tear-off edge. 4. If you need to adjust the position of the perforation so that it meets the printer's tear-off edge, use the MICRO FEED buttons. You can press the top or bottom MICRO FEED button once to feed the paper forward or backward l/216& of an inch, or hold down the button to feed the paper continuously. Note: You can reset the tear-off position only when you are in tear-off mode (after you have pressed the TEAR OFF button once and the TEAR OFF light is on). Using the Printer 3-41
Using Short Tear-Off
3.
Press the TEAR OFF button to enter tear-off mode. The
TEAR OFF
light goes on and the printer feeds the paper’s perforation to the
printer’s tear-off edge.
4.
If you need to adjust the position of the perforation so that it
meets the printer’s tear-off edge, use the
MICRO
FEED
buttons.
You can
press the
top
or bottom
MICRO
FEED
button once to
feed the paper forward or backward
l/216&
of an
down the button to feed the paper continuously.
inch, or hold
Note: You
can reset the tear-off position only when you are in
tear-off mode (after you have pressed the
TEAR OFF
button once
and the
TEAR OFF light is
on).
Using the Printer
3-41