Epson EPL-N2000 User Manual - Page 109
Illegal Card, Continue, Image Optimum, Manual Feed, On Line, Paper Source, Mem Overflow, Reset All
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Illegal Card An incompatible PCMCIA card is installed in the printer. You can either turn off the printer to remove the card, or remove the card while the printer is on. Press Continue to clear the message. Image Optimum The printer cannot print at the requested quality level because of insufficient memory. The printer reduces the quality automatically so that it can continue printing. Check to see if the printout is acceptable. If not, add more memory (for a permanent solution) or set Resolution to 300 dpi and Page Protect to OFF (temporarily). See Chapters 2 and 3 for instructions. Manual Feed paper size Manual feed mode is specified for the current print job. Make sure the indicated paper size is loaded in the multi-purpose paper tray; then press On Line. If you do not want to print in manual feed mode, press Continue. The printer loads the paper as instructed by the Paper Source setting. (For details on using manual feed mode, see "Feeding Envelopes or Paper by Hand" in Chapter 1.) Mem Overflow The printer has insufficient memory available for the current print job. To correct the error, press Continue. If the message remains, press Alt and Continue simultaneously until Reset All appears on the control panel display. You can also clear the error by turning the printer off and back on again. If you still receive a Mem Overflow error, it may be necessary to reduce the number or size of fonts, reduce the number or size of graphics, lower the resolution, or add more memory to the printer. Troubleshooting 6-5