Epson EPL-N2000 User Manual - Page 89
Installing the EPSONScript Module or Memory Modules, 1MB, 2MB, 4MB, 8MB, or 32MB capacity
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
8. Plug the power cord into the printer and an outlet. Then turn on the printer. Installing the EPSONScript Module or Memory Modules To speed up printing of complex, graphics-intensive documents and downloaded fonts, you can install an EPSONScript Level 2 module, EPSON's proprietary PostScript module, or you can add memory to your printer. Install the EPSONScript Level 2 module in the ROM slot on your printer's controller board. The controller board also includes two RAM slots to install optional memory modules. (You can add as much as 64MB to your printer's memory, bringing total memory to 68MB.) Memory modules must meet these requirements: t 72-pins t 1MB, 2MB, 4MB, 8MB, 16MB, or 32MB capacity t Maximum 70 ns access speed t Maximum dimensions: 4.25 inches (108 mm) long, 1.53 inches (39 mm) wide, and 0.4 inch (10 mm) thick. Follow these steps: 1. Turn off the printer. Unplug the power cable from the printer and the electrical outlet. w Warning: To avoid electrical shock, do not access the printer's controller board unless the printer is turned off and unplugged from the electrical outlet. Installing Options 4-21