Epson Ensemble HD 6500 Installation Guide - Page 53
Position the Image, re-open the screen. Verify that it comes down and stops at the correct position.
View all Epson Ensemble HD 6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
4 Use the following commands to raise and lower the screen, and to stop it at the desired position: • S-UP to raise the screen • S-DWN to lower the screen When the screen comes to a stop, press S-DWN again to lower it beyond the current stop-position. You can bring it down as far as the maximum length preset by the factory, or 64 inches. • S-STP to stop the screen 5 Once the screen is positioned where you want it, press S-SET to set the screen position. 6 Press S-UP to raise the screen fully. Note You must raise the screen all the way for the new position to take effect. 7 Press S-DWN re-open the screen. Verify that it comes down and stops at the correct position. Position the Image 1 Press the Pattern button on the projector's remote control. This displays an adjustment pattern to help you align the image. 2 Rotate the focus ring to sharpen the image. Rotate the zoom ring to resize the image so it fits on the screen. Focus Zoom 53