Epson Ensemble HD 6500 Installation Guide - Page 56

Adjusting the Projector Settings, If the projector is installed above 4900 feet 1500 meters, turn

Get Epson Ensemble HD 6500 - Home Cinema System PDF manuals and user guides View all Epson Ensemble HD 6500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Adjusting the Projector Settings Use the projector's remote control to adjust the following settings. Note If you need to restore the projector's factory settings, open the Reset menu and select Reset All. 1 Press the HDMI button on the remote control to select HDMI as the source. 2 Press the Menu button on the remote control. You see the main menu screen: Projector remote control 3 Open the Settings menu (press the d button to highlight Settings, then press Select). 4 To invert the image, press the d button to highlight Projection, then press the Select button. Select Front/Ceiling, then press . The image is inverted. Press the Esc button to return to the Settings menu. 5 If the projector is installed above 4900 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector. Press the Esc button to return to the Settings menu. 6 Highlight Display and press . For the Startup Screen setting, select Off. Press the Esc button twice to return to the main menu. 7 Open the Signal menu and set Output Scaling to 100%. Note To adjust this setting, the AV controller must be turned on so that the projector is receiving a signal. 8 Press the Esc button as needed to exit the menu system. 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
56
Adjusting the Projector Settings
Use the projector’s remote control to adjust the following settings.
Note
If you need to restore the projector’s factory settings, open the
Reset
menu and select
Reset All
.
1
Press the
HDMI
button on the remote control to select HDMI as the source.
2
Press the
Menu
button on the remote control. You see the main menu screen:
3
Open the
Settings
menu (press the
d
button to highlight
Settings
, then press
Select
).
4
To invert the image, press the
d
button to highlight
Projection
, then press the
Select
button. Select
Front/Ceiling
, then press
. The image is inverted.
Press the
Esc
button to return to the Settings menu.
5
If the projector is installed above 4900 feet (1500 meters), turn on
High Altitude Mode
so the fan can
properly cool the projector.
Press the
Esc
button to return to the Settings menu.
6
Highlight
Display
and press
. For the
Startup Screen
setting, select
Off
.
Press the
Esc
button twice to return to the main menu.
7
Open the
Signal
menu and set
Output Scaling
to
100%
.
Note
To adjust this setting, the AV controller must be turned on so that the projector is receiving a signal.
8
Press the
Esc
button as needed to exit the menu system.
Projector
remote control