Epson Ensemble HD 720 Installation Guide - Page 14

Required Tools, Laying Out the Home Theater, Sound-level meter - ensemble hd home theater

Get Epson Ensemble HD 720 PDF manuals and user guides View all Epson Ensemble HD 720 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Required Tools The Ensemble HD home theater system should be installed by a professional audio/video installer or other qualified professional. To install the system, the installer will need these tools: • Phillips head screwdrivers • Power drill and drill bits • Tool for cutting plastic wire management tracks, such as a hacksaw • Tape measure • Level • Stud finder ("edge to edge" stud finder is recommended) • Sound-level meter, such as model 33-2055 available from Radio Shack® • Ladder Warning Do not route the included power cables through the wall or ceiling. They are not rated for this purpose. Deliberate mis-installation could result in fire or other safety hazards. Laying Out the Home Theater The home theater should be arranged as shown below, with the projector and screen at opposite ends of the room and the seating area in the middle. 12 to 16 feet (3.7 to 4.9 m) For a successful installation, the room must be at least 13 feet long (for the PowerLite Home Cinema 1080) or 13.5 feet long (for the PowerLite Home Cinema 720). If your room is shorter than this, you won't be able to install the projector far enough back for the image to fill the whole screen. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
14
Required Tools
The Ensemble HD home theater system should be installed by a professional audio/video installer or other
qualified professional. To install the system, the installer will need these tools:
•
Phillips head screwdrivers
•
Power drill and drill bits
•
Tool for cutting plastic wire management tracks, such as a hacksaw
•
Tape measure
•
Level
•
Stud finder (“edge to edge” stud finder is recommended)
•
Sound-level meter, such as model 33-2055 available from Radio Shack
•
Ladder
Warning
Do not route the included power cables through the wall or ceiling. They are not rated for this purpose. Deliberate
mis-installation could result in fire or other safety hazards.
Laying Out the Home Theater
The home theater should be arranged as shown below, with the projector and screen at opposite ends of the
room and the seating area in the middle.
For a successful installation, the room must be at least 13 feet long (for the PowerLite Home Cinema 1080) or
13.5 feet long (for the PowerLite Home Cinema 720). If your room is shorter than this, you won’t be able to
install the projector far enough back for the image to fill the whole screen.
®
12 to 16 feet
(3.7 to 4.9 m)