Epson Ensemble HD 720 Installation Guide - Page 25
right to align the holes with a joist
View all Epson Ensemble HD 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
7 Tighten the screw on the face of each bracket to secure it to the alignment bar. 8 Determine where the middle of the screen will be. Then position the middle bracket so it's aligned with the middle of the screen. The set screw in the middle of the screen must engage with the bracket. 9 If the middle bracket aligns with the center of a joist (see diagram below), attach it to the ceiling with two wood screws; otherwise use two Toggler anchors. If necessary, you can move the bracket slightly left or right to align the holes with a joist, as long as at least part of the bracket remains aligned with the middle of the screen. Important At least part of the bracket must align with the middle of the screen. If attachment to joist is not possible, then attach with two Toggler anchors here Joist Align two holes with joist, if possible, and fasten with wood screws 10 Tighten the two screws on the face of the bracket to secure it to the alignment bar. 25