Epson Ensemble HD 720 Installation Guide - Page 48
subwoofer. Connect the other end to a grounded power outlet in your home.
View all Epson Ensemble HD 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
5 Locate the 16-foot (5-meter) AV data cable (packed in box #3). Connect it from the 5.1CH OUT port on the AV controller to the INPUT port on the subwoofer. Connect power cord to outlet on subwoofer BASS CONTOUR CONTROL FREQ 61 82 LEVEL 47 98 99 PWR ON MODE SUB OUT Connect these ports with the AV data cable MASTER POWER 6 Connect the AV controller's power cable to the remaining AC OUTPUT connector on the subwoofer. You can also connect it directly to a grounded power outlet in your home. 7 Connect the main power cord (packed with the subwoofer) to the power inlet on the back of the subwoofer. Connect the other end to a grounded power outlet in your home. Note It is recommended that the Ensemble HD system be powered by a dedicated 20-amp circuit. Typical power consumption is about 800 watts. 8 Set the MASTER POWER switch to the ON position. 9 Set the PWR ON MODE switch to the AUTO position. This lets the subwoofer turn on when it detects a signal. 10 Wrap any excess cable, secure it with cable ties (not included), and store it behind the subwoofer. 48