Epson LX-90 User Manual - IBM PC Jr. 8690 PIC for LX-90 - Page 18
Chap 3-elements Of Dot Matrix Printing And Computer/printer Communications, The Print Head - ribbon
View all Epson LX-90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 3 Elements of Dot Matrix Printing and Computer/Printer Communications This chapter is for those of you who want to know something about how your printer works. It's a simple, non-technical explanation of the basics of dot matrix printing that will help you understand some of the later chapters, particularly the ones on user-defined characters and graphics. The Print Head The LX-90 uses a print head with nine pins or wires mounted vertically. Each time a pin is fired, it strikes the inked ribbon and presses it against the paper to produce a dot. This dot is about 1/72nd of an inch in diameter. The size varies slightly depending upon the age of the ribbon and the type of paper used. As the head moves horizontally across the page, these pins are fired time after time in different patterns to produce letters, numbers, symbols, or graphics. For example, to print a pica capital T, the head fires the top pin, moves 1/60th of an inch, fires the top pin again, moves 1/60th of an inch, fires the top pin and the six below it at the same time, moves 1/60th of an inch, fires the top pin, moves another 1/6Oth of an inch, and fires the top pin once more to finish the letter. All this happens in only l/lOOth of a second. Figure 3-7. A capital T 13