Epson LX-90 User Manual - IBM PC Jr. 8690 PIC for LX-90 - Page 85
ESC 74 4A J
View all Epson LX-90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
ESC 74 4A J Forces an immediate line feed of n/216 inches without changing the current line spacing. Prints the contents of the buffer without a car- riage return. Format: ESC "J" n where n = O-255. ESC 75 4B K Turns single-density graphics mode ON. Prints 480 dots per 8-inch line. Format: ESC "K" n1 n2 followed by n data numbers, where n = total number of dot columns, n1 = n MOD 256, n2 = INT (n/256). For example, to print 480 dots, n1 = 244, n2 = 1. ESC 76 4C L Turns low-speed double-density graphics mode ON. Prints 960 dots per 8-inch line. Format: ESC "C" n1 n2 followed by n data numbers, where n = total number of dot columns, n1 = n MOD 256, n2 = INT (n/256). For example, to print 960 dots, n1 = 192, n2 = 3. ESC 77 4D M Turns elite mode (12 cpi) ON. Cannot mix with NLQ, pica, or emphasized. ESC 78 4E N Sets skip over perforation to n lines. Format: ESC "N" n where n = 1 - 127. ESC 79 4F 0 Turns skip over perforation OFF ESC 80 50 P Turns elite mode OFF Returns to pica unless compressed mode is active. B-6