Epson LX-90 User Manual - IBM PC Jr. 8690 PIC for LX-90 - Page 83

ESCape 5 0 cancels ESCape 5 1., ESC 60 3C &lt

Get Epson LX-90 - Impact Printer PDF manuals and user guides View all Epson LX-90 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

ESC 53 35 5 ESC 54 36 6 ESC 55 37 7 ESC 56 38 8 ESC 57 39 9 ESC 60 3C < ESC 58 3A : ESC 63 3F ? ESC 64 40 @ ESC 65 41 A ESCape "5" 1 causes the LX-90 to perform an automatic line feed with each carriage return. ESCape "5" 0 cancels ESCape "5" 1. Selects standard character set if alternate character set has been previously selected. See Appendix A for character set tables. Selects alternate character set. See Appendix A for character set tables. Disables the paper-out sensor. Can also be disabled with DIP switch 1-5. Enables the paper-out sensor. Can also be enabled with DIP switch 1-5. Turns one-line unidirectional mode ON. Prints each line from left to right. Copies the ROM character set to RAM. Format: ESC ":" n1 n2 n3 where n1, n2, and n3 are all 0. They are included for future expansion. The RAM character set must be activated with ESC "%". Redefines one of the four alternate graphics codes-"K","L","Y", or "Z''-as one of the seven graphics density numbers used with the ESCape "*" command. Format: ESC "?s" n where s is K,L,Y, or Z and n is 0 - 6. Reset Code, which resets the printer to its power-up state, including resetting top of page. Clears all text and control codes from the print buffer. Sets line spacing to n/72 inch (n-dot). Format: ESC "A" n where n = O-255. B-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
ESC
53
35
5
ESC
54
36
6
ESC
55
37
7
ESC
56
38
8
ESC
57
39
9
ESC 60 3C <
ESC
58
3A
:
ESC 63 3F ?
ESC 64 40 @
ESC 65 41 A
ESCape “5” 1 causes the LX-90 to perform an
automatic line feed with each carriage return.
ESCape “5” 0 cancels ESCape “5” 1.
Selects standard character set if alternate
character set has been previously selected.
See Appendix A for character set tables.
Selects alternate character set. See Appendix
A for character set tables.
Disables the paper-out sensor. Can also be dis-
abled with DIP switch 1-5.
Enables the paper-out sensor. Can also be
enabled with DIP switch 1-5.
Turns one-line unidirectional mode ON. Prints
each line from left to right.
Copies the ROM character set to RAM. For-
mat:
ESC “:”
n1 n2 n3
where
n1, n2,
and
n3
are all 0. They are
included for future expansion. The RAM char-
acter set must be activated with ESC “%".
Redefines one of the four alternate graphics
codes-“K”,“L”,“Y”, or “Z’‘-as one of the
seven graphics density numbers used with the
ESCape
“*” command. Format:
ESC “?s” n
where s is K,L,Y, or Z and
n
is 0 - 6.
Reset Code, which resets the printer to its
power-up state, including resetting top of page.
Clears all text and control codes from the print
buffer.
Sets line spacing to
n/72
inch (n-dot). Format:
ESC “A”
n
where
n = O-255.
B-4