Epson PowerLite 713c User Manual - Page 22

Connecting S-Video, Connect the plugs at the other end of the cable to the audio

Get Epson PowerLite 713c PDF manuals and user guides View all Epson PowerLite 713c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Connecting S-Video If your video source has an S-video jack, you can use it to project a higher quality video image. However, you'll need an S-video cable, which may be included with your video source, or may be purchased. Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Insert one end of an S-video cable into the projector's S-Video connector. 2. Insert the other end into the S-video output port of your video source. S-Video cable 3. Connect the RCA A/V cable to the left and right Audio jacks on the projector. (Match the red and white plugs to the red and white jacks; you won't need to use the yellow plug.) 4. Connect the plugs at the other end of the cable to the audio output jacks on your video source. 16 Setting Up the Projector

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
16
Setting Up the Projector
Connecting S-Video
If your video source has an S-video jack, you can use it to project a
higher quality video image. However, you
’
ll need an S-video cable,
which may be included with your video source, or may be purchased.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1.
Insert one end of an S-video cable into the projector
’
s
S-Video
connector.
2.
Insert the other end into the S-video output port of your video
source.
3.
Connect the RCA A/V cable to the left and right
Audio
jacks on
the projector. (Match the red and white plugs to the red and
white jacks; you won
’
t need to use the yellow plug.)
4.
Connect the plugs at the other end of the cable to the audio
output jacks on your video source.
S-Video cable