Epson PowerLite 713c User Manual - Page 81
Connecting the Mouse Cable
View all Epson PowerLite 713c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Connecting the Mouse Cable To use the remote control as a mouse, follow the steps below. You'll use a different mouse cable, depending on whether your computer has a round PS/2 mouse port or a flat USB port. 1. Connect one end of the appropriate mouse cable to the projector's Mouse/Com port or the USB port, as shown. connecting PS/2 mouse cable connecting USB mouse cable 2. Disconnect your mouse from the port on the back of your computer and replace it with the other end of the cable. (Your computer's mouse will be disabled while you are using the remote contrtol as a mouse.) Appendix A: Connecting to Additional Equipment 75
Appendix A: Connecting to Additional Equipment
75
Connecting the Mouse Cable
To use the remote control as a mouse, follow the steps below. You
’
ll
use a different mouse cable, depending on whether your computer has
a round PS/2 mouse port or a flat USB port.
1.
Connect one end of the appropriate mouse cable to the projector
’
s
Mouse/Com
port or the USB port, as shown.
2.
Disconnect your mouse from the port on the back of your
computer and replace it with the other end of the cable. (Your
computer
’
s mouse will be disabled while you are using the remote
contrtol as a mouse.)
connecting PS/2 mouse cable
connecting USB mouse cable