Epson Stylus C60 Printer Basics - Page 38

Transporting the Printer - head cleaning

Get Epson Stylus C60 - Ink Jet Printer PDF manuals and user guides View all Epson Stylus C60 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Transporting the Printer If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size. To avoid damage, always leave the ink cartridges installed when transporting the printer. Be sure to remove the tape used in step 4 after installing the printer in its new location. 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer. 2. Unplug the power cord from the electrical outlet. Then disconnect the printer cable from the printer. 3. Remove any paper from the printer and remove the paper support. 4. Open the printer cover. Secure the ink cartridge holder to the printer with tape as shown, then close the printer cover. Tape the ink cartridge holder to the printer case 5. Push in the output tray extension and close the tray. 6. Repack the printer and its attachments in the original box using the protective materials that came with them. See your Start Here sheet. Keep the printer level as you transport it. After transporting the printer, remove the tape securing the print head and test your printer. If you notice a decline in print quality, clean the print head (see page 25); if output is misaligned, align the print head (see page 32). 34 Maintaining Your Printer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
34
Maintaining Your Printer
Transporting the Printer
If you move your printer some distance, you need to prepare it for transportation in
its original box or one of a similar size.
To avoid damage, always leave the ink cartridges installed when
transporting the printer.
Be sure to remove the tape used in step 4 after installing the printer in its
new location.
1.
Turn on the printer, wait until the print head locks in the far right position, then
turn off the printer.
2.
Unplug the power cord from the electrical outlet. Then disconnect the printer
cable from the printer.
3.
Remove any paper from the printer and remove the paper support.
4.
Open the printer cover. Secure the ink cartridge
holder to the printer with tape as shown, then
close the printer cover.
5.
Push in the output tray extension and close the
tray.
6.
Repack the printer and its attachments in the
original box using the protective materials that
came with them. See your
Start Here
sheet.
Keep the printer level as you transport it.
After transporting the printer, remove the tape securing the print head and test your
printer. If you notice a decline in print quality, clean the print head (see page 25); if
output is misaligned, align the print head (see page 32).
Tape the ink cartridge
holder to the printer case