Fluke TI450 SF6 User Manual - Page 36
Spot Markers, Center Box, Measurement, Markers, All Off, One Marker, Three Markers, Cancel
View all Fluke TI450 SF6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Ti200, Ti300, Ti400,Ti450 Users Manual Spot Markers Up to three adjustable, fixed-temperature spot markers are available on the display. You can use these markers to highlight a region before you save the image. The marker selection is set as All Off, One Marker, Two Markers, or Three Markers. To set a Marker: 1. Go to Measurement > Markers. 2. Push the / to highlight the function between All Off, One Marker, Two Markers, and Three Markers. 3. Push to set the marker option and go to the "Move Marker" display. You will see the Move Marker icon and the labels on the function buttons change to Done, Next, and Cancel. To change the Marker position on the display: 1. Push to move the Marker location on the image. 2. Push to highlight the next marker. Do Step 1 again. 3. Do Step 2 for a third marker. 4. Push when done. Center Box The Center Box feature is an adjustable temperature measurement zone (box) that you can center on the infrared image. This zone (box) expands and contracts to different levels within the infrared image. The zone lets the user see an approximate maximum (MAX), average (AVG), and minimum (MIN) temperature measurement in that area. When in Auto Level and Span mode, the Imager automatically sets the level and span according to the infrared scene within the parameters of the Center Box. 32